Before use: Remove the lid of the bean box and put the defined amount of beans into the bean box (the capacity of most fully automatic coffee machines
will not exceed 400G) and fill it to 80%. Remove the water tank from the machine, remove the cap of the water tank, and load the water with about 3/4 capacity. The valve at the bottom of the tank acts as the discharge of water. When the water tank is put back into the machine, the valve can be opened automatically, and the water tank is covered.
During use: After finishing the above preparations, you can make coffee. On the body of the general automatic coffee machine, there are several key functions, such as "small cup", "big cup", hot water/steam, coffee powder and so on. Some do not use a power button, because it does not have a powder grain device, but only to use coffee beans. There are some having coffee powder setting, coffee water (concentration) setting, double cups, and other buttons, the specific buttons are different depending on the machine. A large cup of coffee is required to press the large button. So it's very simple to make coffee with a fully automatic coffee machine. It doesn't have to be too much to do, just to meet the basic conditions of the coffee.
After use: If you need to make fancy coffee, you need to make a cup of espresso coffee in advance. Then use the latte cup to 1/3-1/2 full-fat milk to let the steam pipe touch the surface of the milk, at a distance about a finger from the inside of the cup. Turn on the steam switch, and when the milk foam is about to fill the cup, turn off the steam and then remove the milk cup. At this moment, the right-hand side with the latte cup, the left-hand side with the espresso, and pour the foam into the freshly brewed espresso.